Lader til Battericeller Batteriladere

Praktisk helautomatisk universallader som passer til de fleste battericeller man kommer over. Kan lade både Li-ion, Li-Polymer, LiFePo4, NiMH eller NiCD samtidig, og har LED-indikatorer på ladestatus pr. batteri. Ladetiden pr. batteri varierer etter kjemi og størrelse på batteriet, og varierer mellom 1 time og opp mot 6 timer på de største battericellene.

Passer til 3,2, 3.6V og 3.7V LiFePo4, Lithium-ion og Lithium-Polymer battericeller i størrelse 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500,18650, 18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650. Andre størrelsevariasjoner innenfor dette passer også.

Passer til 1.2V NiMH og NiCD battericeller i størrelse AA, AAA, A Sub-C (SC) og LR-14, C (Ikke D).

Merk, det er kun plass til 2 stk batterier med diameter 25mm samtidig.

Du kan lese mer om produktet her  

Lær mer

Fast processor Charger for Li-ion cells in sizes 18650, 18700, 20700, 21700
LEDs showing the charging status
Three-stage charging method: TC/CC/CV
Reactivation of deeply discharged cells and 0V cells
charging Current: 1X 2a/2X 1a | Charging voltage: 4, 2V
Powered by 230V-2-pin cable included
Protection: Thermal, short-circuit, before the reverse insertion of the battery Lær mer

Professional processor Charger for Li-ion cells in sizes 14500, 14650, 16340, 17500.17670, 18350, 18500, 18650, 18700, 20700, 21700, 22650, 25500, 26650
Three-stage charging method: TC/CC/CV
Two independent charging channels
Reactivation of deeply discharged cells and 0V cells
Charging current: 0, 5A
Charging voltage: 4, 2V
Powered by Micro USB no power supply included
Protection: Thermal, short-circuit, before the reverse insertion of the battery Lær mer

Fast processor Charger for Li-ion cells in sizes 18650, 18700, 20700, 21700
LEDs showing the charging status
Three-stage charging method: TC/CC/CV
Reactivation of deeply discharged cells and 0V cells
charging Current: 1X 2a/2X 1a | Charging voltage: 4, 2V
Powered by 230V-2-pin cable included
Protection: Thermal, short-circuit, before the reverse insertion of the battery Lær mer

Professional processor Charger for Li-ion cells in sizes 14500, 14650, 16340, 17500.17670, 18350, 18500, 18650, 18700, 20700, 21700, 22650, 25500, 26650
Three-stage charging method: TC/CC/CV
Two independent charging channels
Lcd
Reactivation of deeply discharged cells and 0V cells
Measurement of cell capacity
Charging current: 0, 5A
Charging voltage: 4, 2V
Powered by Micro USB no power supply included
Protection: Thermal, short-circuit, before the reverse insertion of the battery Lær mer

The Panasonic Eneloop Charger BQ-CC63 allows you to charge 1 to 8 R6/R03 rechargeable batteries.

Technical data

• Charger designed for charging NiMH batteries of type R6/AA and R03/AAA
• Can charge 1 to 8 R6/AA or R03/AAA rechargeable batteries at the same time
• Input voltage: AC 100-240V, 50/60Hz
• 8 LED Lights
• Microprocessor that controls the charging of batteries
• Size (L x W x D): 147 x 119 x 28 mm
• Weight: approx. 240 g (without power cord)

The BQ-CC63 microprocessor charger is designed to charge eneloop or NiMH rechargeable batteries of type R6/AA or R03/AAA. At the same time, you can charge 1, 2, 3, 4, 5, 6, 7 or 8 batteries.

The BQ-CC63 is a fast and perfectly crafted microprocessor-controlled charger.
It is designed for a demanding user.
The charger has 8 independent charging channels.
The charging progress and its termination is controlled by the Smart Charge function, which automatically checks the voltage and temperature of the batteries. The process and the charging end are indicated by 8 LED lights.

Example of battery charging time

Eneloop AA 2000 mAh-5 H
Eneloop AAA 800 mAh-3 h
NiMH AA 2500 mAh-6 h

Lær mer

All-compatible LCD Smart Li-ion battery charger with 6 slots
• Monitors and loads each of the 6 slots independently
• Micro USB & DC input, charge everywhere
• Clearly see the status for real-time charging
• Multiple protections ensure safe charging
• High conversion and low heat development
• High precision, automatic shutdown when fully charged

In the box:
Charger, USB cable, manual

Batteries not included! Lær mer

Lær mer

Lær mer

Lær mer

Multifunksjonell lader til 14500, 16340, 18650, 25500, 26650 og 26700 Lithium battericeller. Lader med 1A (1000mA) på begge kanalene. Passer til battericeller med nominell spenning på 3.2V eller 3.7V med ladespenning 3,65V (LiFePo4) eller 4,2V (Li-ion) Lær mer

Kjekk å ha dersom du skal ta med den fantastiske C9000 laderen på tur i bilen, båten, hytta eller andre steder du har 12V men ikke 240V Lær mer

Lær mer

Lær mer

Lær mer

Dette produktet er kun lader, 3V batterier kjøpes separat her. 

Merk, denne laderen passer ikke 3,6/3,7V Li-ion da den krever 4,2V ladespenning. 

Lær mer

• Passer til Ni-Cd og Ni-Mh
• input volt: 230V AC
• Kan lade opp til 2 9V eller 4 AA/AAA
• LED-lys indikator

Lær mer

Lær mer

Ladetid ca 3-7 timer
Lader for AAA, AA, 9V
Automatisk ladestopp
Lader NIMH og NiCd batterier Lær mer

T240 is a new design dual balance charger by HTRC,which can charge two different kinds of batteries simultaneously.Multi-function,high power,Utilizing 3.2 inch color LCD Toch screen display,easy operation,built-in cooling fan,DC 11-18V or AC 100-240V dual power.Designed for charging LiPo LiFe Lilon LiHV NiCd NiMh Pb Smart Batteries.

It can support power distribution in AC mode,total power 150W (CH1+CH2=150Watt). and in DC mode, works in 2 * 120W. Max charge current can reach 10A each port in both AC and DC mode.

Features:

*Full plastic shell, safe, compact, beautiful.
*Twin-channel,charge two different kinds of batteries simultaneously.
*high power,single port max 150W.support power distribution.
*Practical for variety of batteries.LiPo LiFe Lilon NiCd NiMh Pb,and high power battery LiHV.
*Automatic identification of Li-Po batteries cells counts
*Adjustable digital DC Power.
*Built in smart cooling fan for easy heat dissipation.
*Built-In PFC AC adapter high efficiency.comes with power switch.
*Graph display of charging status
*Multiple charging modes.
-Lipo/Lilo/LiFe/LiHv: balance charge, charge, storage, discharge.
-NiMH/NiCd: Charge, Discharge, Cycle.
-PB: Charge,Discharge,Trickle.
*Multi-function:
-Battery Meter:Display lithium battery cell counts,battery capacity percentage,each cell's  voltage. (does not support 1s battery)
-TVC(Terminal voltage control):The Charger allows user to set the charge/discharge end voltage.
-Lithium Battery internal Resistance Check: can display each cell's resistance.(does not support 1s battery)
-Calibration: cell voltage monitoring and calibration.
-Smart battery:Smart battery I,II,III,(Need optional DJI Charging cable)
*Data storage and loading
*Re-peak and cycling of NiMH/NiCD battery.
*Maximum Safety:Automatic charge current limit,Delta-peak sensitivity, capacity limit, processing time limit,temperature threshold.
*Firmware update.

Specification:

Model No.:HT-0099
Input: AC 100-240V / DC 11-18V
Charge power: AC mode 150W (CH1+CH2=150Watt),DC mode 120W*2 =240W
Discharge power:Max 10W*2
Charge current range:0.1-10A *2
Discharge current range:0.1-2A*2
Lilon/LiPo/LiFe/LiHV cell count :1-6cells*2
NiCd/NiMH battery cell count:1-15cells*2
PB Battery voltage:2-20V*2
Smart battery:I/II/III*2
Current drain for balancing:500mA/cell
Net Weight:0.48kg
Dimension:145*105*64mm
Gross weight:0.85kg
Package size:215*155*75mm

Package list:

1 x T240 charger
2 x Charge cable banana plug to T-Plug
2 x Extension charge cable T-Plug to XT60
2 x balance board with pin cord
1 x AC Cord (US EU UK AU optional)
1 x DC Cord
1 x User's Manual Lær mer